Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.
SKU#
B7120115
Item#
91945
UNSPSC
47131701

Bobrick B7120-115V TrimLine Surface-Mounted ADA Dryer

$510.11

White surface-mounted ADA hand dryer


Features

  • 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish cover with UL 94-5VA black plastic trim and side panels
  • 115V AC, 15 Amp, 1725 Watts, 50/60 Hz, Single Phase, cULus Listed
  • The 4" projection complies with ADA, barrier free requirements. The surface-mounted installation is ideal for additions or after-market renovations
  • Designed with uniquely patented dual-flow parallax air ducts, the dryer provides a broad swirling circulation of air for a more comfortable and faster dry. With only 73 dBA, these dryers offer optimum balance of fast dry time and moderate sound level
  • Touch-free, auto-sensor turns dryer on when hands are placed under and off when hands are removed
  • Limited 10 -year warranty on all parts except motor brushed. Motor brushes shall be warranted for 3 years from date of purchase

Specifications

Materials: Cover - 18-gauge, Type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim and side panels. Cover equipped with uniquely designed dual air outlets. Air-inlet is equipped with vandal-resistant grille. Cover projects no more than 4" (100mm) from wall and is secured to mounting base with two vandal-resistant, recessed hex screws
Mounting Base - 20-gauge (1.5mm) plated steel with four 0.236'' (6mm) diameter mounting holes
Motor - Universal, 1/7 hp, 8000 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch
Fans - Two balanced, double-inlet centrifugal fans are mounted on motor shaft; directs airflow over heating element at 71 cfm
Heating Element — Two coiled nickel-chrome heating elements are mounted in mica frame and protected by automatic thermal-overload switches. Heating elements, heat air without hot spots — inaccessible to vandals
Electronic Control - Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Size: 13-25/32" (350mm) w x 13-19/32" (345mm) h x 4" (100mm) d
Warranty 10-Year Limited Warranty
Operation: No-touch operation. Electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying. Drying time less than 25 seconds. Remove hands from path of sensor and dryer stops. Dryer operates only when actually drying hands, which saves energy and operating costs. Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally
Installation: Wall Preparation:
Locate mounting base on wall using template provided. For brick, stone, and concrete walls drill four 0.315" (8mm) holes to suit provided wall plugs 0.315" (8mm) x 1-1/4" (45mm) and screws # 10 (4.8mm) x 2" (50mm) long. See template for wall plug and screw installation details. For plaster or dry wall construction, provide concealed backing to comply with local building codes and secure with four #10 (4.8) round-head sheet-metal screws or 3/16" (5mm) toggle bolts (not furnished). Provide electrical service from nearest distribution panel to dryer mounting base in conformance with local electrical codes
Wiring Instructions:
Connect ground wire to ground terminal marked, the black or hot wire to terminal marked L1, and neutral or white wire to terminal marked N
Notes: Electronic sensor in Automatic dryers will pick up movement within 6" (150mm) of the air-outlet opening. Use caution when choosing location for Automatic dryers in confined areas. Consider proximity to doorways and other traffic areas
Bobrick automatic hand dryers should be installed at least 15" (380mm) above any projection or horizontal surface which may interfere with the operation of the automatic sensor

Certifications

UL: cULs Listed
VDE: VDE Approved
EU Directives: Complies with ROHS and CE Marked
More Information
Finish No
We found other products you might like!
  1. Quick view
  2. Quick view
  3. Quick view
  4. Quick view
  5. Quick view
  6. Quick view
  7. Quick view
  8. Quick view
  9. Quick view
  10. Quick view
  11. Quick view
  12. Quick view
  13. Quick view
  14. Quick view
  15. Quick view