Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Bobrick B3961 Classic Series Recessed Roll Towel Dispenser and Waste Receptacle


Stainless steel recessed automatic universal roll paper towel dispenser and waste receptacle with satin finish


  • Satin-finish stainless steel
  • Seamless beveled flange
  • Dispenses universal 1-1/2" to 2" (38 to 51mm) diameter core, up to 8" (205mm) diameter, 8" (205mm) wide, non-perforated, non-proprietary rolls
  • Four paper cost savings features: Adjustable towel lengths, second activation time delay, shorter length on second activation and stub roll dispensing
  • Concealed towels assure hygiene and are intuitively dispensed; no motion required
  • Dispenser is powered by 4 "D" size alkaline batteries (not furnished) or an option 6 volt DC power supply. AC Adapter Kit, Part No. 3974-57
  • Receptacle is 8" (205mm) deep
  • Complies with EPA Resource Conversation Initiative


Materials: Cabinet - 18-8 S, type 304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin-finish. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Flange - 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin-finish. Drawn and beveled, one-piece, seamless construction
Door - 18-8 S, type 304, 20-gauge (0.9mm) stainless steel with satin-finish. Drawn, one-piece, seamless construction. Secured to cabinet with a full-length stainless steel piano-hinge. Equipped with a tumbler lock keyed like other Bobrick washroom accessories
Touch-free Roll Towel Dispenser - Durable, high-impact resin materials. Accepts standard-core rolls up to 8" (205mm) wide, 8" (205mm) diameter. 800 ft (244mm) long. Dispenses one 12" (300mm) length of towel per pull. Accommodates up to 3-1/2" (90mm) diameter stub roll with automatic transfer to full roll
Waste Receptacle - 18-8 S, type 304, 22-gauge (0.8mm) stainless steel with satin finish. Front and sides of bottom and all top edges are hemmed for safe handling. Secured to cabinet with a tumbler lock keyed like other Bobrick washroom accessories. Equipped with interior hooks for optional vinyl liner
Size: 17-3/16" (437mm) w x 56" (1422mm) h x 9-1/8" (230mm) d
Capacity: Roll Towel Dispenser: up to 3-1/2" (90mm) diameter stub roll
Waste Receptacle: 12-gal. (45.5-L)

Folded Towel Dispenser Module convertible in field: order Bobrick Part No. 3944-52
Automatic, Universal Roll Towel Dispenser Module convertible in field: order Bobrick Part No. 3974-50
18-gallon Waste Receptacle: order Bobrick Part No. 368-60
Reusable Vinyl Liner: order Bobrick Part No. 368-16
LinerMate® for 12-gal waste only: order Bobrick Part No. 3944-134
Operation: Touch-Free roll towel dispensing mechanism one 12" (300mm) length of paper towel per pull and operates smoothly and quietly. User only touches the paper. Exterior paper towel feed wheel available for use when filling dispenser and for user to advance paper should it become necessary to feed paper through dispenser. Automatic transfer dispenses stub roll before new roll is dispensed. When stub roll is depleted, advancement of paper towel feed wheel allows the main roll to start dispensing without the need to open the dispenser. Dispenser accommodates up to 8" (205mm) wide, 8" (205mm) diameter, non perforated paper towel rolls and dispenses with less than 5 pounds of force (22.2 N) to comply with barrier-free accessibility guidelines (including ADAAG in U.S.A.)
To empty waste receptacle, unlock with key provided
Note: To accommodate disposable trash liners, order LinerMate™, sold as an optional accessory item. LinerMate eliminates unsightly trash liner overhang and facilitates installation and removal of disposable trash liners in the 12-gallon waste receptacle
Installation: Provide framed rough wall opening 15-7/8" wide x 54-5/8" high (403 x 1387mm). Minimum recessed depth required to finish face of wall is 4" (100mm). Allow clearance for construction features that may protrude into opening from opposite wall. Coordinate with mechanical engineer to avoid pipes, vents, and conduits. If unit projects above top of wainscot, provide aluminum channel or other filler to eliminate gap between flange and finish face of wall. Mount unit in wall opening with shims between framing and cabinet at all points indicated by an S, then secure unit with #8 x 1-1/4" (4.2 x 32mm ) sheet-metal screws (not furnished)


Barrier-Free Code Compliance: Complies with barrier-free accessibility guidelines (including ADAAG in the U.S.A.)
US EPA: Complies with Reduce & Reuse Resource Conservation Initiative
More Information
Finish US32D/630
We found other products you might like!
  1. Quick view
  2. Quick view
  3. Quick view
  4. Quick view
  5. Quick view
  6. Quick view
  7. Quick view
  8. Quick view
  9. Quick view
  10. Quick view
  11. Quick view
  12. Quick view
  13. Quick view
  14. Quick view
  15. Quick view